110-800mm HDPE Double-Wall Corrugated Pipe Extrusion Line

• Warranty: 1 Year
• Product Type: PE Pipe
• Screw No.: Single-screw
• Automation: Automatic
• Computerized: Computerized
• Certification: CE, ISO9001:2008, SGS TUV
• Model NO.: SJ-BWG
• Customized: Customized
• Condition: New
• After-sales Service: Provide on-Site Installation, Commission and Train
• Name: 110-800mm HDPE Double-Wall Corrugated Pipe Extrus
• Motor: Siemens Beide/Weg
• Contactor: Siemens/Delixi
• Temperature Controller: Rkc/Omron
• Pipe Size: 63-1000mm
• Product Application: Water Drainage, Electric Conduit
• Gearbox: Guomao Brand
• Inverter: ABB/Holip
• Mould Cooling: Air+Water
• Mould Materails: Alumunim, Alloy Steel
• Extruder Model: Single Screw Extruder
• PLC: Siemens/ Delta
• Production Speed: 0.5-12m/Min
• Screw Barrel Material: 38CrMoAl
• Screw Rotating Speed: 1-120rpm
• Transport Package: Covered by Plastic Film
• Specification: 20mx3mx3m
• Trademark: CAMEL
• Origin: China(Mainland)
• HS Code: 84772090
• Production Capacity: 800 PCS/Year

Product Description

110-800mm HDPE  Double-Wall Corrugated Pipe Extrusion Line
 

Product Description

Double wall corrugated pipe is mature product which has the advantage of low weight, low cost, anti-corrosion,good ring stiffness and flexibility. Our company has developed PE double wall corrugated pipe extrusion line formore than ten years. We have the whole series of double wall corrugated pipe machine: horizontal type, verticaltype and shuttle type. Our machine can process wide range of material, including HDPE, PP, PVC, etc.

Our double wall corrugated pipe extrusion line can produce from inner diameter of 63mm to 1000mm.



Techiniacal Parameter

Model	Structure	Raw material	ID (Min.mm)	ID (Max.mm)	Speed (m/min)
SGB250	Horizontal	HDPE / pp	110	250	0.5-5.0
SGB400	Horizontal	HDPE / pp	200	400	0.5-3.5
SGB600	Vertical	HDPE / pp	250	600	0.5-3.0
SGB800	Vertical	HDPE / pp	250	800	0.3-3.0
SGB800	Shuttle	HDPE / pp	500	800	0.3-3.0

Detailed Photos

EXtruder

Adopt L/D ratio 38:1 screw for virgin material. Adopt L/D 33:1 screw for recycled material. We also have choice of twin screw and barrel for other material such PVC powder, PP powder, etc. Provide suitable extruder for different customer requirements.

Die Head and Calibration sleeve

Both outer layer and inner layer are extruded inside die head. Each material flow channel inside die head is placed evenly. Each channel is after heat treatment and mirrorpolishing to ensure material flow smoothly. Also die head provides compressed air between both layer.Calibration sleeve is used to cool inner layer to form smooth and flat pipe inside. Pressure water flows inside calibration sleeve to have good cooling effect. Vacuum is created on calibration sleeve surface when producing big diameter pipe, ensure inner pipe roundness.

Corrugator

Corrugator is used to place and move corrugated mould. Vacuum is created to absorb outer layer into corrugated mould to form corrugate shape. By moving corrugated mould, pipe is also pulled out from corrugator.

Cooling tank

Cooling tank is used to cool pipe,

Cutter

Cutter controlled by Siemens PLC, double knife cutter. Equipped with precise inspection device ensures the cutter accurately placing at the correct position of double wall corrugated pipe. Whole cutting process is accurate and fully automatic.

Stacker

Support and pile plastic pipe

 

Company Profile